An simple energy system on-board is often necessary to power the AC voltage users, while the vehicle or the boat is away from the electrical grid (port, garage, camping...).
In that case the energy is stored in the battery, which is actually charged by power sources on-board, like genset, solar generator, wind turbine, alternator or a combination of them. Studer Innotec offers the range of products that secure the management and the conversion of this energy, while securing an optimal supply of the appliances on-board.
| ___________________________________________________ |
 |
A basic energy system on board
A MOSFET splitter, generating almost no voltage loss, enables to split the charge current in between several batteries when the vehicle is on the move. The inverter converts then the direct voltage (DC) of the secondary battery into alternating voltage (AC) without consuming the battery enegy of the vehicle.
|
| |
|
 |
A simple and reliable system on-borad
The inverter-charger charges the battery from the grid or from a genset, and powers any kind of electrical appliance. It converts the battery DC voltage to AC voltage. The models equiped with the system Smart-Boost enable to add the power of the source to the inverter one.
|
| |
|
 |
An upgradeable power
The power available for the users can be adapted in the course of time by adding inverters in parallel or by creating additional phases. It is therefore possible to install up to 9 inverters in a 3-phase power system.
|
| |
|
 |
3 x 400Vac 3-phases grid on-board
A 3-phase grid can be built with 3 inverters. The serie Xtender enables to create a 3-phase grid and to charge simultaneously the battery, even if only a single phase is available as a power source.
|
| |
|
 |
Successive charge of the batteries
In this system, a battery separator enables the charge of one or several auxiliary batteries once the primary battery is charged.
|
| |
|
 |
Simultaneous charge of batteries and DC/DC conversion
A MOSFET splitter, with almost no voltage losses, enables to split the charge current to and in between several batteries. From the battery pack, a DC/DC converter will step up.
|
Studer Innotec, Studer, Inverters, Inverter-chargers, Inverter/chargers, Sine wave, Xtender, AJ, Compact, Chargers, Battery chargers, Converters, DC/DC, DC/AC, AC/DC, Battery splitters, Charge, Batteries, State of charge, Battery measurement, Battery monitoring, Remote systems, Systems on-board, Mobile systems, Autonomous systems, Energy systems, Renewable energy, Emergency power supply, Backup systems, Uninterruptible power supply, Solar, Electrification, Rural electrification, Emergency lighting, UPS, Alternating voltage, Solsafe, S-Box, Anti-blackout system, X-Connect, Solar home system, Solar installation, Energy conversion, AC-coupling, Grid-feeding, Hybrid solar, Minigrid, Smart-Boost, Photovoltaics, PV
